Subdivision and engineering guidelines
The Engineering Requirements for Infrastructure Construction Policy sets out our requirements for engineering design and the construction of subdivision and other development works within the Macedon Ranges.
The policy provides guidance and aims to ensure the quality of new public assets, the compatibility of private works with Council's infrastructure, and the protection of the environment from the impacts of development.
Standard drawings
Standard drawings are provided to assist in the design of a number of structures.
Vehicle access drawings
Footpaths/shared paths/pram ramp drawings
Road kerb drawings
Drainage/house connection drawings
- Side entry pit-SD012(PDF, 123KB)
- Grated side entry pit at kerb and channel-SD013(PDF, 113KB)
- Junction pit-SD014(PDF, 112KB)
- V-notch pit-SD016(PDF, 79KB)
- Grated pit in reserve channels and paved areas-SD017(PDF, 86KB)
- Grated pit in footpath-SD018(PDF, 88KB)
- Precast concrete pit lid and circular insert. 900mm by 600mm pits-SD019(PDF, 67KB)
- Haunched pits-SD020(PDF, 105KB)
- Step irons-SD021(PDF, 67KB)
- Anchor blocks for pipes up to 600mm diameter-SD022(PDF, 86KB)
- Property (house) connection to easement drain pit-SD023(PDF, 62KB)
- Property (house) connection to easement pipe-SD024(PDF, 68KB)
- Property (house) connection to street drainage-SD025(PDF, 82KB)
- Lintels B2 kerb and SM2 kerb type-SD026(PDF, 135KB)
- Agricultural subsoil drain-SD027(PDF, 60KB)
- Driveable culvert endwall. Pipe culvert up to 600mm diameter and box culverts up to 600mm wide-SD028(PDF, 81KB)
- Grouted rock endwall-SD029(PDF, 113KB)
- Reinforced concrete wingwall, types 1, 2 and 3. Pipe culvert 300mm to 525mm-SD030(PDF, 102KB)
- Reinforced concrete wingwall, types 1, 2 and 3. Pipe culvert 600mm to 2100mm-SD031(PDF, 131KB)